Charge the Wrist Device.

Place the wrist device into the USB charger clip and plug the other end of the USB connector into the computer.When the battery icon reaches 100% charging is complete.

Watches When the battery icon reaches 100% charging is complete.

Charge the Wrist Device.

Install Epson View

  • App Store
  • Google play

Start Epson View

Start Epson View Start Epson View

Create an Account

enter the required details in “Create an Account” and proceed to the “Pairing” screen.

Create an Account

Set up the Wrist Device

When the wrist device is charged remove it from the USB clip, select your preferred language and then select “Smartphone Settings”.
Ten seconds after “Please start the app” is displayed transmission mode will start.

Set up the Wrist Device

Pairing

Select the wrist device that you want to pair with and tap “Connect”.

Pairing Pairing

Initial Setup is now Complete

Your wrist device and Epson View are now ready to use.

Initial Setup is now Complete

Now, let’s start measuring…

Press START/STOP icon on the clock screen to select “Run” and start GPS measurement.

(When measuring other things select using V and press START/STOP to start measurement.)

Now, let's start measuring… Now, let's start measuring…

Charge the Wrist Device.

Place the wrist device into the USB charger clip and plug the other end of the USB connector into the computer.

Watches When the battery icon reaches 100% charging is complete.

Charge the Wrist Device.

Download Epson View Uploader.

Download Epson View Uploader.

When you want to upload the data into the web application (Epson View) please click the button below to go to the download site and download the Epson View Uploader.

  • Epson View Sync DOWNLOAD

Install Epson View Uploader

Start the downloaded file and install the uploader by following the instructions displayed on the screen.

Install Epson View Uploader

Account Creation and Device Settings

Start Epson View Uploader and enter the required details in “Create an Account”.
In the final step your profile information is entered into your wrist device, so do not remove your wrist device from the USB charger clip.

Account Creation and Device Settings

Initial Setup is now complete.

Your wrist device and Epson View are now ready to use.

Initial Setup is now complete.

Now, let’s start measuring…

Press START/STOP icon on the clock screen to select “Run” and start GPS measurement.

(When measuring other things select using V and press START/STOP to start measurement.)

Now, let's start measuring…